When your Kegco appliance needs expert attention in Westminster, CO, trust Standley Appliance Repair for dependable, professional service. With years of hands-on experience, factory training, and advanced certifications, their skilled technicians know how to diagnose and repair Kegco units with precision and care.
Choose the team committed to quality workmanship and customer satisfaction. Call Standley Appliance Repair today at (720) 307-7411 for fast, certified Kegco repair service you can count on.
We provide service 24/7 365 · 6 AM - 10 PM
Rapid repairs for HVAC systems and home appliances to restore comfort fast.
Skilled Westminster technicians delivering honest, dependable service.
Fast, expert repairs completed the same day to restore comfort and convenience.
Expert appliance & HVAC repairs that restore comfort and keep it running.
Kegco Kegerator Repair in Westminster, CO 80031 provides professional service for residential and commercial draft beer systems. Our technicians diagnose cooling issues, carbonation problems, leaking lines, temperature inconsistencies, and electrical faults to restore smooth operation and dependable performance. We service stand-alone units, built-in models, and specialty beer dispensers with careful attention to efficiency, cleanliness, and long-term reliability.
Our kegerator cooling system repair service addresses compressors, thermostats, evaporator components, fans, relays, and control boards. If your unit is not getting cold enough, freezing the keg, cycling too often, or making unusual noises, we provide accurate troubleshooting and effective repair solutions. Every visit is focused on improving draft quality, preserving beverage freshness, and helping your equipment run at the proper temperature.
We also handle beer line, CO2, and dispensing component service for customers experiencing foamy pours, weak flow, pressure imbalance, gas leaks, or faucet problems. From regulators and couplers to towers and tubing, we inspect the full dispensing setup to identify the source of the issue and correct it quickly. This service helps maintain a better pour, cleaner taste, and a more consistent draft experience for home bars, restaurants, and entertainment spaces.
For customers dealing with power or control issues, our appliance repair service includes switches, wiring, interior lighting, digital displays, and temperature regulation components. Whether the unit fails to turn on, loses settings, or stops responding correctly, we work to restore safe and dependable operation. Our team is available every day 6 AM - 10 PM, and you can schedule service by calling (720) 307-7411.
Preventive maintenance is another important service we offer for Kegco draft systems in Westminster. Routine inspections, cleaning, seal checks, and performance testing help reduce unexpected breakdowns and extend the life of your equipment. This is especially valuable for busy households and commercial environments that rely on a properly functioning beer dispenser for daily use and guest satisfaction.
Customers choose our local repair company for responsive service, experienced technicians, and clear workmanship standards. We stand behind completed repairs with a 90 Days Parts and Labor warranty and provide an exclusive $25 OFF First Time Customers offer. When you need dependable Kegco kegerator repair in Westminster, CO 80031, our team is ready to deliver fast, practical solutions tailored to your unit.
$25 OFF First Time Customers
Oven & Stove repair
Double Wall Oven Repair
Washing Machine repair
Dryer repair
Buld-in Microwave Repair
Water Heater repair
Freezer Repair
Garbage Disposal repair
Dishwasher repair
Kegerator Repair
Refrigerator repair
Wine Cooler and Cellar Repair
Stackable Washer and Dryer Repair
Furnace Repair
Air Conditioner Service
Termostat Repair
| Service | Estimated Cost | Typical Notes |
|---|---|---|
| Diagnostic / Service Call | $80–$140 | Often charged to inspect cooling, CO2, regulator, or draft issues |
| Basic Cleaning and Tune-Up | $90–$180 | Commonly includes line cleaning, faucet check, and general inspection |
| Beer Line Cleaning | $70–$150 | Price varies by number of lines and buildup level |
| CO2 Leak Check / Gas System Repair | $90–$220 | May involve replacing washers, clamps, tubing, or fittings |
| Regulator Replacement | $120–$260 | Includes common parts and labor for standard single-gauge or dual-gauge units |
| Faucet / Tap Replacement | $100–$220 | Depends on faucet type and whether shank components also need replacement |
| Thermostat Replacement | $150–$300 | Typical if unit is running too warm or too cold |
| Fan Motor Replacement | $160–$320 | Common for airflow or tower-cooling problems |
| Compressor Relay / Start Component Repair | $140–$280 | Often done when compressor will not start properly |
| Compressor Repair or Replacement | $350–$900 | Higher-cost repair; often compared against replacement value of the kegerator |
| Door Seal / Gasket Replacement | $100–$220 | Helps resolve cooling loss and condensation issues |
| Temperature Control / Cooling Issue Repair | $140–$350 | Broad estimate depending on whether issue is electrical, airflow, or control related |
| After-Hours / Emergency Visit | $150–$300+ | Usually added on top of standard labor and parts |
Yes. We provide Kegco kegerator repair services for customers in Westminster, CO 80031, including diagnostics, part replacement, temperature issues, CO2 system problems, and general performance repairs.
We repair many common Kegco kegerator issues, such as the unit not cooling properly, excessive foam, beer not dispensing, CO2 leaks, regulator problems, faulty thermostats, damaged door seals, noisy operation, and draft tower cooling issues.
If your Kegco kegerator is blowing warm air, freezing beer lines, producing too much foam, failing to maintain pressure, leaking, or making unusual noises, it is a good idea to schedule professional service. A proper inspection can identify the cause and help prevent larger problems.
Yes. We service Kegco kegerators used in homes, bars, restaurants, offices, and event spaces. Whether you have a single-tap home unit or a larger commercial setup, we can help diagnose and repair the issue.
Yes. Excessive foam is often caused by temperature imbalance, incorrect CO2 pressure, dirty beer lines, worn seals, or faucet problems. We inspect the full dispensing system to correct the cause and improve pour quality.
We use quality replacement parts compatible with Kegco kegerators whenever parts are needed. Depending on the problem, this may include thermostats, regulators, faucets, couplers, fan components, seals, or other dispensing and cooling system parts.
Repair time depends on the issue and whether replacement parts are required. Many common Kegco kegerator problems can be diagnosed and repaired relatively quickly, while more complex cooling or gas system issues may take longer.
Yes. In addition to repairs, we offer maintenance services to help keep your Kegco kegerator running efficiently. Regular cleaning, line checks, pressure testing, and component inspections can help reduce breakdowns and improve beer quality.
Standley Appliance Repair
6920 N Pecos St, Denver, CO 80221
(720) 307-7411